BGP¶

RFC 4271 BGP-4

exception ryu.lib.packet.bgp.AdminReset(data='')¶

exception ryu.lib.packet.bgp.AdminShutdown(data='')¶

Error to indicate Administrative shutdown.

RFC says: If a BGP speaker decides to administratively shut down its peering with a neighbor, then the speaker SHOULD send a NOTIFICATION message with the Error Code Cease and the Error Subcode 'Administrative Shutdown'.

exception ryu.lib.packet.bgp.AttrFlagError(data='')¶

Error to indicate recognized path attributes have incorrect flags.

RFC says: If any recognized attribute has Attribute Flags that conflict with the Attribute Type Code, then the Error Subcode MUST be set to Attribute Flags Error. The Data field MUST contain the erroneous attribute (type, length, and value).

exception ryu.lib.packet.bgp.AttrLenError(data='')¶

exception ryu.lib.packet.bgp.AuthFailure(data='')¶

class ryu.lib.packet.bgp.BGPEvpnEsImportRTExtendedCommunity(**kwargs)¶: ES-Import Route Target Extended Community

class ryu.lib.packet.bgp.BGPEvpnEsiLabelExtendedCommunity(label=None, mpls_label=None, vni=None, **kwargs)¶: ESI Label Extended Community

class ryu.lib.packet.bgp.BGPEvpnMacMobilityExtendedCommunity(**kwargs)¶: MAC Mobility Extended Community

class ryu.lib.packet.bgp.BGPFlowSpecRedirectCommunity(**kwargs)¶

Flow Specification Traffic Filtering Actions for Redirect.

Attribute	Description
as_number	Autonomous System number.
local_administrator	Local Administrator.

class ryu.lib.packet.bgp.BGPFlowSpecTPIDActionCommunity(**kwargs)¶

Flow Specification TPID Actions.

Attribute	Description
actions	Bit representation of actions. Supported actions are `TI(inner TPID action)` and `TO(outer TPID action)`.
tpid_1	TPID used by `TI`.
tpid_2	TPID used by `TO`.

class ryu.lib.packet.bgp.BGPFlowSpecTrafficActionCommunity(**kwargs)¶

Flow Specification Traffic Filtering Actions for Traffic Action.

Attribute	Description
action	Apply action. The supported action are `SAMPLE` and `TERMINAL`.

class ryu.lib.packet.bgp.BGPFlowSpecTrafficMarkingCommunity(**kwargs)¶

Flow Specification Traffic Filtering Actions for Traffic Marking.

Attribute	Description
dscp	Differentiated Services Code Point.

class ryu.lib.packet.bgp.BGPFlowSpecTrafficRateCommunity(**kwargs)¶

Flow Specification Traffic Filtering Actions for Traffic Rate.

Attribute	Description
as_number	Autonomous System number.
rate_info	rate information.

class ryu.lib.packet.bgp.BGPFlowSpecVlanActionCommunity(**kwargs)¶

Flow Specification Vlan Actions.

Attribute	Description
actions_1	Bit representation of actions. Supported actions are `POP`, `PUSH`, `SWAP`, `REWRITE_INNER`, `REWRITE_OUTER`.
actions_2	Same as `actions_1`.
vlan_1	VLAN ID used by `actions_1`.
cos_1	Class of Service used by `actions_1`.
vlan_2	VLAN ID used by `actions_2`.
cos_2	Class of Service used by `actions_2`.

class ryu.lib.packet.bgp.BGPKeepAlive(type_=4, len_=None, marker=None)¶

BGP-4 KEEPALIVE Message encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field.

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

class ryu.lib.packet.bgp.BGPMessage(marker=None, len_=None, type_=None)¶

Base class for BGP-4 messages.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field. one of `BGP_MSG_*` constants.

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

serialize(payload=None, prev=None)¶

Encode a protocol header.

This method is used only when encoding a packet.

Encode a protocol header. Returns a bytearray which contains the header.

payload is the rest of the packet which will immediately follow this header.

prev is a packet_base.PacketBase subclass for the outer protocol header. prev is None if the current header is the outer-most. For example, prev is ipv4 or ipv6 for tcp.serialize.

class ryu.lib.packet.bgp.BGPNotification(error_code, error_subcode, data=b'', type_=3, len_=None, marker=None)¶

BGP-4 NOTIFICATION Message encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field.
error_code	Error code field.
error_subcode	Error subcode field.
data	Data field.

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

class ryu.lib.packet.bgp.BGPOpen(my_as, bgp_identifier, type_=1, opt_param_len=0, opt_param=None, version=4, hold_time=0, len_=None, marker=None)¶

BGP-4 OPEN Message encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field.
version	Version field.
my_as	My Autonomous System field. 2 octet unsigned integer.
hold_time	Hold Time field. 2 octet unsigned integer.
bgp_identifier	BGP Identifier field. An IPv4 address. For example, '192.0.2.1'
opt_param_len	Optional Parameters Length field. Ignored when encoding.
opt_param	Optional Parameters field. A list of BGPOptParam instances. The default is [].

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

class ryu.lib.packet.bgp.BGPPathAttributePmsiTunnel(pmsi_flags, tunnel_type, mpls_label=None, label=None, vni=None, tunnel_id=None, flags=0, type_=None, length=None)¶

P-Multicast Service Interface Tunnel (PMSI Tunnel) attribute

classmethod from_jsondict(dict_, decode_string=<function b64decode>, **additional_args)¶

Create an instance from a JSON style dict.

Instantiate this class with parameters specified by the dict.

This method takes the following arguments.

Argument	Descrpition
dict_	A dictionary which describes the parameters. For example, {"Param1": 100, "Param2": 200}
decode_string	(Optional) specify how to decode strings. The default is base64. This argument is used only for attributes which don't have explicit type annotations in _TYPE class attribute.
additional_args	(Optional) Additional kwargs for constructor.

class ryu.lib.packet.bgp.BGPRouteRefresh(afi, safi, demarcation=0, type_=5, len_=None, marker=None)¶

BGP-4 ROUTE REFRESH Message (RFC 2918) encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field.
afi	Address Family Identifier
safi	Subsequent Address Family Identifier

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

class ryu.lib.packet.bgp.BGPUpdate(type_=2, withdrawn_routes_len=None, withdrawn_routes=None, total_path_attribute_len=None, path_attributes=None, nlri=None, len_=None, marker=None)¶

BGP-4 UPDATE Message encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
marker	Marker field. Ignored when encoding.
len	Length field. Ignored when encoding.
type	Type field.
withdrawn_routes_len	Withdrawn Routes Length field. Ignored when encoding.
withdrawn_routes	Withdrawn Routes field. A list of BGPWithdrawnRoute instances. The default is [].
total_path_attribute_len	Total Path Attribute Length field. Ignored when encoding.
path_attributes	Path Attributes field. A list of BGPPathAttribute instances. The default is [].
nlri	Network Layer Reachability Information field. A list of BGPNLRI instances. The default is [].

classmethod parser(buf)¶

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

An object to describe the decoded header.
A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.
The rest of packet.

exception ryu.lib.packet.bgp.BadBgpId(data='')¶

Error to indicate incorrect BGP Identifier.

RFC says: If the BGP Identifier field of the OPEN message is syntactically incorrect, then the Error Subcode MUST be set to Bad BGP Identifier. Syntactic correctness means that the BGP Identifier field represents a valid unicast IP host address.

exception ryu.lib.packet.bgp.BadLen(msg_type_code, message_length)¶

exception ryu.lib.packet.bgp.BadMsg(msg_type)¶

Error to indicate un-recognized message type.

RFC says: If the Type field of the message header is not recognized, then the Error Subcode MUST be set to Bad Message Type. The Data field MUST contain the erroneous Type field.

exception ryu.lib.packet.bgp.BadNotification(data='')¶

exception ryu.lib.packet.bgp.BadPeerAs(data='')¶

Error to indicate open message has incorrect AS number.

RFC says: If the Autonomous System field of the OPEN message is unacceptable, then the Error Subcode MUST be set to Bad Peer AS. The determination of acceptable Autonomous System numbers is configure peer AS.

exception ryu.lib.packet.bgp.BgpExc(data='')¶

Base bgp exception.

CODE = 0¶: BGP error code.

SEND_ERROR = True¶: Flag if set indicates Notification message should be sent to peer.

SUB_CODE = 0¶: BGP error sub-code.

exception ryu.lib.packet.bgp.CollisionResolution(data='')¶

Error to indicate Connection Collision Resolution.

RFC says: If a BGP speaker decides to send a NOTIFICATION message with the Error Code Cease as a result of the collision resolution procedure (as described in [BGP-4]), then the subcode SHOULD be set to "Connection Collision Resolution".

exception ryu.lib.packet.bgp.ConnRejected(data='')¶

Error to indicate Connection Rejected.

RFC says: If a BGP speaker decides to disallow a BGP connection (e.g., the peer is not configured locally) after the speaker accepts a transport protocol connection, then the BGP speaker SHOULD send a NOTIFICATION message with the Error Code Cease and the Error Subcode "Connection Rejected".

class ryu.lib.packet.bgp.EvpnASBasedEsi(as_number, local_disc, type_=None)¶

AS based ESI value

This type indicates an Autonomous System(AS)-based ESI Value that can be auto-generated or configured by the operator.

class ryu.lib.packet.bgp.EvpnArbitraryEsi(value, type_=None)¶

Arbitrary 9-octet ESI value

This type indicates an arbitrary 9-octet ESI value, which is managed and configured by the operator.

class ryu.lib.packet.bgp.EvpnEsi(type_=None)¶

Ethernet Segment Identifier

The supported ESI Types:

EvpnEsi.ARBITRARY indicates EvpnArbitraryEsi.

EvpnEsi.LACP indicates EvpnLACPEsi.

EvpnEsi.L2_BRIDGE indicates EvpnL2BridgeEsi.

EvpnEsi.MAC_BASED indicates EvpnMacBasedEsi.

EvpnEsi.ROUTER_ID indicates EvpnRouterIDEsi.

EvpnEsi.AS_BASED indicates EvpnASBasedEsi.

class ryu.lib.packet.bgp.EvpnEthernetAutoDiscoveryNLRI(route_dist, esi, ethernet_tag_id, mpls_label=None, vni=None, label=None, type_=None, length=None)¶: Ethernet A-D route type specific EVPN NLRI

class ryu.lib.packet.bgp.EvpnEthernetSegmentNLRI(route_dist, esi, ip_addr, ip_addr_len=None, type_=None, length=None)¶: Ethernet Segment route type specific EVPN NLRI

class ryu.lib.packet.bgp.EvpnInclusiveMulticastEthernetTagNLRI(route_dist, ethernet_tag_id, ip_addr, ip_addr_len=None, type_=None, length=None)¶: Inclusive Multicast Ethernet Tag route type specific EVPN NLRI

class ryu.lib.packet.bgp.EvpnIpPrefixNLRI(route_dist, ethernet_tag_id, ip_prefix, esi=None, gw_ip_addr=None, mpls_label=None, vni=None, label=None, type_=None, length=None)¶: IP Prefix advertisement route NLRI

class ryu.lib.packet.bgp.EvpnL2BridgeEsi(mac_addr, priority, type_=None)¶

ESI value for Layer 2 Bridge

This type is used in the case of indirectly connected hosts via a bridged LAN between the CEs and the PEs. The ESI Value is auto-generated and determined based on the Layer 2 bridge protocol.

class ryu.lib.packet.bgp.EvpnLACPEsi(mac_addr, port_key, type_=None)¶

ESI value for LACP

When IEEE 802.1AX LACP is used between the PEs and CEs, this ESI type indicates an auto-generated ESI value determined from LACP.

class ryu.lib.packet.bgp.EvpnMacBasedEsi(mac_addr, local_disc, type_=None)¶

MAC-based ESI Value

This type indicates a MAC-based ESI Value that can be auto-generated or configured by the operator.

class ryu.lib.packet.bgp.EvpnMacIPAdvertisementNLRI(route_dist, ethernet_tag_id, mac_addr, ip_addr, esi=None, mpls_labels=None, vni=None, labels=None, mac_addr_len=None, ip_addr_len=None, type_=None, length=None)¶: MAC/IP Advertisement route type specific EVPN NLRI

class ryu.lib.packet.bgp.EvpnNLRI(type_=None, length=None)¶: BGP Network Layer Reachability Information (NLRI) for EVPN

class ryu.lib.packet.bgp.EvpnRouterIDEsi(router_id, local_disc, type_=None)¶

Router-ID ESI Value

This type indicates a router-ID ESI Value that can be auto-generated or configured by the operator.

class ryu.lib.packet.bgp.EvpnUnknownEsi(value, type_=None)¶: ESI value for unknown type

class ryu.lib.packet.bgp.EvpnUnknownNLRI(value, type_, length=None)¶: Unknown route type specific EVPN NLRI

exception ryu.lib.packet.bgp.FiniteStateMachineError(data='')¶

Error to indicate any Finite State Machine Error.

RFC says: Any error detected by the BGP Finite State Machine (e.g., receipt of an unexpected event) is indicated by sending the NOTIFICATION message with the Error Code Finite State Machine Error.

class ryu.lib.packet.bgp.FlowSpecComponentUnknown(buf, type_=None)¶: Unknown component type for Flow Specification NLRI component

class ryu.lib.packet.bgp.FlowSpecDSCP(operator, value, type_=None)¶

Diffserv Code Point for Flow Specification NLRI component

Set the 6-bit DSCP field at value. [RFC2474]

class ryu.lib.packet.bgp.FlowSpecDestPort(operator, value, type_=None)¶

Destination port number for Flow Specification NLRI component

Set the destination port of a TCP or UDP packet at value.

class ryu.lib.packet.bgp.FlowSpecDestPrefix(length, addr, type_=None)¶: Destination Prefix for Flow Specification NLRI component

class ryu.lib.packet.bgp.FlowSpecDestinationMac(length, addr, type_=None)¶

Destination Mac Address.

Set the Mac Address at value.

class ryu.lib.packet.bgp.FlowSpecEtherType(operator, value, type_=None)¶

Ethernet Type field in an Ethernet frame.

Set the 2 byte value of an Ethernet Type field at value.

class ryu.lib.packet.bgp.FlowSpecFragment(operator, value, type_=None)¶

Fragment for Flow Specification NLRI component

Set the bitmask for operand format at value. The following values are supported.

Attribute	Description
LF	Last fragment
FF	First fragment
ISF	Is a fragment
DF	Don't fragment

class ryu.lib.packet.bgp.FlowSpecIPProtocol(operator, value, type_=None)¶

IP Protocol for Flow Specification NLRI component

Set the IP protocol number at value.

class ryu.lib.packet.bgp.FlowSpecIPv4NLRI(length=0, rules=None)¶

Flow Specification NLRI class for IPv4 [RFC 5575]

classmethod from_user(**kwargs)¶

Utility method for creating a NLRI instance.

This function returns a NLRI instance from human readable format value.

Parameters:	kwargs -- The following arguments are available.

Argument	Value	Operator	Description
dst_prefix	IPv4 Prefix	Nothing	Destination Prefix.
src_prefix	IPv4 Prefix	Nothing	Source Prefix.
ip_proto	Integer	Numeric	IP Protocol.
port	Integer	Numeric	Port number.
dst_port	Integer	Numeric	Destination port number.
src_port	Integer	Numeric	Source port number.
icmp_type	Integer	Numeric	ICMP type.
icmp_code	Integer	Numeric	ICMP code.
tcp_flags	Fixed string	Bitmask	TCP flags. Supported values are `CWR`, `ECN`, `URGENT`, `ACK`, `PUSH`, `RST`, `SYN` and `FIN`.
packet_len	Integer	Numeric	Packet length.
dscp	Integer	Numeric	Differentiated Services Code Point.
fragment	Fixed string	Bitmask	Fragment. Supported values are `DF` (Don't fragment), `ISF` (Is a fragment), `FF` (First fragment) and `LF` (Last fragment)

Example:

>>> msg = bgp.FlowSpecIPv4NLRI.from_user(
...     dst_prefix='10.0.0.0/24',
...     src_prefix='20.0.0.1/24',
...     ip_proto=6,
...     port='80 | 8000',
...     dst_port='>9000 & <9050',
...     src_port='>=8500 & <=9000',
...     icmp_type=0,
...     icmp_code=6,
...     tcp_flags='SYN+ACK & !=URGENT',
...     packet_len=1000,
...     dscp='22 | 24',
...     fragment='LF | ==FF')
>>>

You can specify conditions with the following keywords.

The following keywords can be used when the operator type is Numeric.

Keyword	Description
<	Less than comparison between data and value.
<=	Less than or equal to comparison between data and value.
>	Greater than comparison between data and value.
>=	Greater than or equal to comparison between data and value.
==	Equality between data and value. This operator can be omitted.

The following keywords can be used when the operator type is Bitmask.

Keyword	Description
!=	Not equal operation.
==	Exact match operation if specified. Otherwise partial match operation.
+	Used for the summation of bitmask values. (e.g., SYN+ACK)

You can combine the multiple conditions with the following operators.

Keyword	Description
\|	Logical OR operation
&	Logical AND operation

Returns:	A instance of FlowSpecVPNv4NLRI.

class ryu.lib.packet.bgp.FlowSpecIPv6DestPrefix(length, addr, offset=0, type_=None)¶: IPv6 destination Prefix for Flow Specification NLRI component

class ryu.lib.packet.bgp.FlowSpecIPv6FlowLabel(operator, value, type_=None)¶

class ryu.lib.packet.bgp.FlowSpecIPv6Fragment(operator, value, type_=None)¶

Fragment for Flow Specification for IPv6 NLRI component

Attribute	Description
LF	Last fragment
FF	First fragment
ISF	Is a fragment

class ryu.lib.packet.bgp.FlowSpecIPv6NLRI(length=0, rules=None)¶

Flow Specification NLRI class for IPv6 [RFC draft-ietf-idr-flow-spec-v6-08]

classmethod from_user(**kwargs)¶

Utility method for creating a NLRI instance.

This function returns a NLRI instance from human readable format value.

Parameters:	kwargs -- The following arguments are available.

Argument	Value	Operator	Description
dst_prefix	IPv6 Prefix	Nothing	Destination Prefix.
src_prefix	IPv6 Prefix	Nothing	Source Prefix.
next_header	Integer	Numeric	Next Header.
port	Integer	Numeric	Port number.
dst_port	Integer	Numeric	Destination port number.
src_port	Integer	Numeric	Source port number.
icmp_type	Integer	Numeric	ICMP type.
icmp_code	Integer	Numeric	ICMP code.
tcp_flags	Fixed string	Bitmask	TCP flags. Supported values are `CWR`, `ECN`, `URGENT`, `ACK`, `PUSH`, `RST`, `SYN` and `FIN`.
packet_len	Integer	Numeric	Packet length.
dscp	Integer	Numeric	Differentiated Services Code Point.
fragment	Fixed string	Bitmask	Fragment. Supported values are `ISF` (Is a fragment), `FF` (First fragment) and `LF` (Last fragment)
flow_label	Intefer	Numeric	Flow Label.

Note

For dst_prefix and src_prefix, you can give "offset" value like this: 2001::2/128/32. At this case, offset is 32. offset can be omitted, then offset is treated as 0.

class ryu.lib.packet.bgp.FlowSpecIPv6SrcPrefix(length, addr, offset=0, type_=None)¶: IPv6 source Prefix for Flow Specification NLRI component

class ryu.lib.packet.bgp.FlowSpecIcmpCode(operator, value, type_=None)¶

ICMP code Flow Specification NLRI component

Set the code field of an ICMP packet at value.

class ryu.lib.packet.bgp.FlowSpecIcmpType(operator, value, type_=None)¶

ICMP type for Flow Specification NLRI component

Set the type field of an ICMP packet at value.

class ryu.lib.packet.bgp.FlowSpecInnerVLANCoS(operator, value, type_=None)¶

VLAN CoS Fields in an Inner Ethernet frame.

Set the 3 bit CoS field at value..

class ryu.lib.packet.bgp.FlowSpecInnerVLANID(operator, value, type_=None)¶

Inner VLAN ID.

Set VLAN ID at value.

class ryu.lib.packet.bgp.FlowSpecL2VPNNLRI(length=0, route_dist=None, rules=None)¶

Flow Specification NLRI class for L2VPN [draft-ietf-idr-flowspec-l2vpn-05]

classmethod from_user(route_dist, **kwargs)¶

Utility method for creating a L2VPN NLRI instance.

This function returns a L2VPN NLRI instance from human readable format value.

Parameters:	kwargs -- The following arguments are available.

Argument	Value	Operator	Description
ether_type	Integer	Numeric	Ethernet Type.
src_mac	Mac Address	Nothing	Source Mac address.
dst_mac	Mac Address	Nothing	Destination Mac address.
llc_ssap	Integer	Numeric	Source Service Access Point in LLC.
llc_dsap	Integer	Numeric	Destination Service Access Point in LLC.
llc_control	Integer	Numeric	Control field in LLC.
snap	Integer	Numeric	Sub-Network Access Protocol field.
vlan_id	Integer	Numeric	VLAN ID.
vlan_cos	Integer	Numeric	VLAN COS field.
inner_vlan_id	Integer	Numeric	Inner VLAN ID.
inner_vlan_cos	Integer	Numeric	Inner VLAN COS field.

class ryu.lib.packet.bgp.FlowSpecLLCControl(operator, value, type_=None)¶

Control field in LLC header in an Ethernet frame.

Set the Contorol field at value.

class ryu.lib.packet.bgp.FlowSpecLLCDSAP(operator, value, type_=None)¶

Destination SAP field in LLC header in an Ethernet frame.

Set the 2 byte value of an Destination SAP at value.

class ryu.lib.packet.bgp.FlowSpecLLCSSAP(operator, value, type_=None)¶

Source SAP field in LLC header in an Ethernet frame.

Set the 2 byte value of an Source SAP at value.

class ryu.lib.packet.bgp.FlowSpecNextHeader(operator, value, type_=None)¶

Next Header value in IPv6 packets

Set the IP protocol number at value

class ryu.lib.packet.bgp.FlowSpecPacketLen(operator, value, type_=None)¶

Packet length for Flow Specification NLRI component

Set the total IP packet length at value.

class ryu.lib.packet.bgp.FlowSpecPort(operator, value, type_=None)¶

Port number for Flow Specification NLRI component

Set the source or destination TCP/UDP ports at value.

class ryu.lib.packet.bgp.FlowSpecSNAP(operator, value, type_=None)¶

Sub-Network Access Protocol field in an Ethernet frame.

Set the 5 byte SNAP field at value.

class ryu.lib.packet.bgp.FlowSpecSourceMac(length, addr, type_=None)¶

Source Mac Address.

Set the Mac Address at value.

class ryu.lib.packet.bgp.FlowSpecSrcPort(operator, value, type_=None)¶

Source port number for Flow Specification NLRI component

Set the source port of a TCP or UDP packet at value.

class ryu.lib.packet.bgp.FlowSpecSrcPrefix(length, addr, type_=None)¶: Source Prefix for Flow Specification NLRI component

class ryu.lib.packet.bgp.FlowSpecTCPFlags(operator, value, type_=None)¶

TCP flags for Flow Specification NLRI component

Supported TCP flags are CWR, ECN, URGENT, ACK, PUSH, RST, SYN and FIN.

class ryu.lib.packet.bgp.FlowSpecVLANCoS(operator, value, type_=None)¶

VLAN CoS Fields in an Ethernet frame.

Set the 3 bit CoS field at value.

class ryu.lib.packet.bgp.FlowSpecVLANID(operator, value, type_=None)¶

VLAN ID.

Set VLAN ID at value.

class ryu.lib.packet.bgp.FlowSpecVPNv4NLRI(length=0, route_dist=None, rules=None)¶

Flow Specification NLRI class for VPNv4 [RFC 5575]

classmethod from_user(route_dist, **kwargs)¶

Utility method for creating a NLRI instance.

This function returns a NLRI instance from human readable format value.

Parameters:	route_dist -- Route Distinguisher. kwargs -- See `ryu.lib.packet.bgp.FlowSpecIPv4NLRI`

Example:

>>> msg = bgp.FlowSpecIPv4NLRI.from_user(
...     route_dist='65000:1000',
...     dst_prefix='10.0.0.0/24',
...     src_prefix='20.0.0.1/24',
...     ip_proto=6,
...     port='80 | 8000',
...     dst_port='>9000 & <9050',
...     src_port='>=8500 & <=9000',
...     icmp_type=0,
...     icmp_code=6,
...     tcp_flags='SYN+ACK & !=URGENT',
...     packet_len=1000,
...     dscp='22 | 24',
...     fragment='LF | ==FF')
>>>

class ryu.lib.packet.bgp.FlowSpecVPNv6NLRI(length=0, route_dist=None, rules=None)¶

Flow Specification NLRI class for VPNv6 [draft-ietf-idr-flow-spec-v6-08]

classmethod from_user(route_dist, **kwargs)¶

Utility method for creating a NLRI instance.

This function returns a NLRI instance from human readable format value.

Parameters:	route_dist -- Route Distinguisher. kwargs -- See `ryu.lib.packet.bgp.FlowSpecIPv6NLRI`

exception ryu.lib.packet.bgp.HoldTimerExpired(data='')¶

Error to indicate Hold Timer expired.

RFC says: If a system does not receive successive KEEPALIVE, UPDATE, and/or NOTIFICATION messages within the period specified in the Hold Time field of the OPEN message, then the NOTIFICATION message with the Hold Timer Expired Error Code is sent and the BGP connection is closed.

exception ryu.lib.packet.bgp.InvalidNetworkField(data='')¶

exception ryu.lib.packet.bgp.InvalidNextHop(data='')¶

exception ryu.lib.packet.bgp.InvalidOriginError(data='')¶

Error indicates undefined Origin attribute value.

RFC says: If the ORIGIN attribute has an undefined value, then the Error Sub- code MUST be set to Invalid Origin Attribute. The Data field MUST contain the unrecognized attribute (type, length, and value).

exception ryu.lib.packet.bgp.MalformedAsPath(data='')¶

Error to indicate if AP_PATH attribute is syntactically incorrect.

RFC says: The AS_PATH attribute is checked for syntactic correctness. If the path is syntactically incorrect, then the Error Subcode MUST be set to Malformed AS_PATH.

exception ryu.lib.packet.bgp.MalformedAttrList(data='')¶

Error to indicate UPDATE message is malformed.

RFC says: Error checking of an UPDATE message begins by examining the path attributes. If the Withdrawn Routes Length or Total Attribute Length is too large (i.e., if Withdrawn Routes Length + Total Attribute Length + 23 exceeds the message Length), then the Error Subcode MUST be set to Malformed Attribute List.

exception ryu.lib.packet.bgp.MalformedOptionalParam(data='')¶

If recognized optional parameters are malformed.

RFC says: If one of the Optional Parameters in the OPEN message is recognized, but is malformed, then the Error Subcode MUST be set to 0 (Unspecific).

exception ryu.lib.packet.bgp.MaxPrefixReached(data='')¶

exception ryu.lib.packet.bgp.MissingWellKnown(pattr_type_code)¶

Error to indicate missing well-known attribute.

RFC says: If any of the well-known mandatory attributes are not present, then the Error Subcode MUST be set to Missing Well-known Attribute. The Data field MUST contain the Attribute Type Code of the missing, well-known attribute.

exception ryu.lib.packet.bgp.NotSync(data='')¶

exception ryu.lib.packet.bgp.OptAttrError(data='')¶

Error indicates Optional Attribute is malformed.

RFC says: If an optional attribute is recognized, then the value of this attribute MUST be checked. If an error is detected, the attribute MUST be discarded, and the Error Subcode MUST be set to Optional Attribute Error. The Data field MUST contain the attribute (type, length, and value).

exception ryu.lib.packet.bgp.OtherConfChange(data='')¶

exception ryu.lib.packet.bgp.OutOfResource(data='')¶

exception ryu.lib.packet.bgp.PeerDeConfig(data='')¶

class ryu.lib.packet.bgp.PmsiTunnelIdUnknown(value)¶: Unknown route type specific _PmsiTunnelId

class ryu.lib.packet.bgp.RouteTargetMembershipNLRI(origin_as, route_target)¶

Route Target Membership NLRI.

Route Target membership NLRI is advertised in BGP UPDATE messages using the MP_REACH_NLRI and MP_UNREACH_NLRI attributes.

exception ryu.lib.packet.bgp.RoutingLoop(data='')¶

class ryu.lib.packet.bgp.StreamParser¶

Streaming parser for BGP-4 messages.

This is a subclass of ryu.lib.packet.stream_parser.StreamParser. Its parse method returns a list of BGPMessage subclass instances.

try_parse(data)¶

Try to extract a message from the given bytes.

This is an override point for subclasses.

This method tries to extract a message from bytes given by the argument.

Raises TooSmallException if the given data is not enough to extract a complete message but there's still a chance to extract a message if more data is come later.

exception ryu.lib.packet.bgp.UnRegWellKnowAttr(data='')¶

exception ryu.lib.packet.bgp.UnacceptableHoldTime(data='')¶

Error to indicate Unacceptable Hold Time in open message.

RFC says: If the Hold Time field of the OPEN message is unacceptable, then the Error Subcode MUST be set to Unacceptable Hold Time.

exception ryu.lib.packet.bgp.UnsupportedOptParam(data='')¶

Error to indicate unsupported optional parameters.

RFC says: If one of the Optional Parameters in the OPEN message is not recognized, then the Error Subcode MUST be set to Unsupported Optional Parameters.

exception ryu.lib.packet.bgp.UnsupportedVersion(locally_support_version)¶

Error to indicate unsupport bgp version number.

RFC says: If the version number in the Version field of the received OPEN message is not supported, then the Error Subcode MUST be set to Unsupported Version Number. The Data field is a 2-octet unsigned integer, which indicates the largest, locally-supported version number less than the version the remote BGP peer bid (as indicated in the received OPEN message), or if the smallest, locally-supported version number is greater than the version the remote BGP peer bid, then the smallest, locally- supported version number.